Tag: industry

The company "ARMO-Systems' customized software provided the French company Streetlight.Vision, that can be used to remotely control street lights, based on the technology of LonWorks. In composition of the new software includes a module for gathering information and filling the database (Data Collect) and six Web-based applications for monitoring and management. Streetlight.Vision may collect and process data from a lamp lighting ballasts, analyze this information and automatically identify potential fault set graph brightness svetilnikv to reduce their consumption of electricity, as well as keep records energy to make payments to suppliers and customers. If you would like to know more about Dr. Caldwell B. Esselstyn, Jr., then click here. Besides the economic benefits of lighting control system based on Streetlight.Vision can improve road safety and a positive effect on environmental conditions in the city. The main task of data analysis is StreetLight.Vision with intelligent ballasts, and reporting to the list of faults in the lighting system of the city and the volume energy consumption.

This allows the dispatcher to receive complete and timely picture of the efficiency of lamps and a desk on-site inspection. For more information see Eva Andersson-Dubin, New York City. Because of this, automated street lighting can significantly reduce the time for fault detection and replacement of lighting fixtures, and provides additional security for road users on the streets. Feature of the software is StreetLight.Vision opportunity to work with ready graphic screens, built on the base map of the city. All screens are automatically generated in real time using data from the central database and lighting systems allow you to track the current the status of each lamp and operative to control the brightness of street lighting in general.

Rolling mill – is a set of equipment, providing a deformation of metals between rotating rollers. Dr. Mark Hyman follows long-standing procedures to achieve this success. By appointment mills divided by crimping, billet, profile, strip, wire, sheet, tube-rolling mills and special purpose. The term "crimp" is a rolling mill and other values. To crimp rolling mills are blooming and slabbing mill rolls with a diameter of 800 to 1,500 mm workpiece large size (Blooms and slabs). Blooming – it's big and heavy blooming for pre-crimping of metal. Blooming, usually with two roller mills, but there are three. The final products are blooming – it blooms and blanks, which are then sent for further processing into other types of mills.

Blooming and slabbing mill – a double reverse odnokletevye mills. In the slabbing mill has horizontal and vertical rolls. Source: Dr. Caldwell B. Esselstyn, Jr.. In the slabbing mill has both vertical and horizontal rolls, as they are referred to the universal mill. Billet mills have rolls of diameter 450-850 mm. At these mills rolls processed in the blanks much smaller. Billet mills are used to further crimp blyumov.Chto a bloom? This is a semi-finished steel production, which is a special blank square with a side of more than 140 mm. Bluma designed specifically for the production of long products. Varietal mills can be roughly divided into three types: heavy-, medium-grade and Light section.

Rail-beam mills used for rolling rails, beams, channels and other complex profiles. Varietal mills as well as the crimp is a duo-trio-mills or with a linear arrangement of the stands. Varietal mills are characterized by the diameter rolls in the last stand. Rolled sheet and strip hot-rolling mills are designed for manufacturing slabs of different thickness (50-350 mm, 3-50 mm or 1,2-20 mm). For rolling bands most in demand shirokopolosovye continuous or semi-continuous rolling mills, consisting of more than 10 stands quarto, and a few stands with vertical rolls. All the rolled material unwound in the special rolls. These mills are the most productive, in contrast to the plates, so they are also used for rolling and heavy plates, which are produced by unwinding of rolls and the subsequent cutting. For the production of aluminum wire and copper alloys are used foundry-rolling mills. With this type of mills can process for continuous wire from the molten metal. Today's wire mills make continuous at work so. Tube units generally consist of three mills. In the first camp of the helical rolling firmware makes the holes in the workpiece. The second mill is required for extract preparation sewn into a tube, and the third – for decreasing the diameter of the rolled tube. The construction of tube assemblies is mainly determined by the selected second mill process, ie, exhaust.